In this user interface, you can configure OSI tunnels for those NEs at the edge of a non-OSI network. In this way, the Web LCT for an OSI network is able to pass through a non-OSI network to manage OSI NEs.
In the NE Explorer, select from the Function Tree. Click OSI Tunnel tab.
Field |
Value |
Description |
|
|---|---|---|---|
OSI Tunnel Attributes |
Remote IP Address |
For example, 10.70.73.152 |
Displays the IP address at the opposite end of the OSI tunnel. |
LAPD Actor |
User, Network |
Displays the LAPD actor. |
|
Efficient LAPD Enable |
Enabled, Disabled |
Displays whether the LAPD is enabled. |
|
Configurable LAPD Enable |
Enabled, Disabled |
Enables or disables the LAPD. |
|
LAPD Parameter |
Remote IP Address |
For example, 10.70.73.152 |
Displays the IP address at the opposite end of the OSI tunnel. |
L2 Wait Time to Retry(s) |
1-20 |
Sets the time to wait before retrying transmission at Layer 2. |
|
L2 Retry Times |
2-6 |
Sets the times of retry at Layer 2. |
|
L3 Hello Timer(s) |
1-100 |
Sets the timer for hello packets at Layer 3. |
|
L3 ES Timer(s) |
1-200 |
Sets the end system timer at Layer 3. |
|
L3 IS Timer(s) |
1-200 |
Sets the intermediate system timer at Layer 3. |
|
L3 Hold Timer(s) |
2-63 |
Sets the timer for holding time at Layer 3. |
|
COST |
1-63 |
Sets overhead. |
|