In this user interface, you can query and set the alarm suppression state and severity for the control link control plane.
In the NE Explorer, select an NE and choose from the Function Tree, click Control Link Alarm Suppression and Severity tab.
Field |
Value |
Description |
|---|---|---|
Alarm Event |
For example: CPC_OSPF_CL_DOWN |
Displays alarm events of the control link control plane. |
Source/Sink Suppression Status |
Suppressed, Not Suppressed |
Sets the suppression status of an alarm on the source or sink. |
Severity |
Critical, Major, Minor, Warning |
Set the severity of the control plane alarm. |
Name |
For example: PPP-0-7-255-1-11 |
Displays the name of a control link. |
Source (Sink) NE |
For example: NE(126-532) |
Displays the name for the source or sink NE. |
Source (Sink) Node |
For example: 1.1.5.32 |
Displays the source or sink node ID. |
Source (Sink) Port |
shelf ID(shelf name)-slot number-board name-port number(port name) |
Displays the source or sink port of an ASON trail. |
Index |
A string in hexadecimal format For example: 0x5828B001 |
Displays the index number of a control link. |
Type |
LoopBack, PPP, Broadcast, Multicast, Unnumbered |
Displays the type of the link. |
Status |
Up, Down |
Down indicates that this channel is disabled. Up indicates that this channel is enabled. |
OSPF |
Enabled, Disabled |
Displays whether the OSPF routing protocol is enabled. |
Path Number |
Decimal integer For example: 0 |
Displays the CCID of a control link. |
Address |
For example: 1.1.1.5 |
Displays the network address. |
Subnet Mask |
IP mask For example: 255.255.255.0 |
Displays the network address mask. |