NEs can be accessed to the Web LCT through a serial port or the command line tool. This operation views and sets the serial port access function of NEs.
NOTICE: Procedure
- In the NE Explorer, select an NE and choose from the Function Tree.
- Check the Enable Serial Port Access check box. Click Refresh to query whether the current NE allows serial port access.
- Check the Access NM check box. Click Apply to enable the serial access function of the NE.
NOTE: If you want to disable this function, uncheck the Access NM check box. Click Apply.
If you want to connect the serial port to command line, check the Access Command Line check box.
- Set the Baud Rate. Click Apply.
