The current performance data has 15-minute and 24-hour intervals. To know whether services are normal within the current period of 15 minutes and 24 hours, you can view the current performance data.
Prerequisites
- For details on performance event types, see Introduction to Performance Events.
- The service must be configured.
- The performance monitoring parameters must be set.
- The NE time must be synchronized with the time of the computer where the Web LCT is installed.
Procedure
- Navigation Path
In the NE Explorer, select an NE, and navigate to the user interface of viewing the performance data of boards or service objects in the following ways from the Function Tree.
NE Type
Application Object
Navigation Path
NGWDM, RTN and Submarine NE
Physical port
Select a desired board and choose from the Function Tree.
- Complete the following information: Monitored Object Filter Criteria, Monitor Period. Select the
performance event type in the Measure field and
the Count field.
NOTE: All performance events supported by the board are provided as options for setting the performance event.
- Optional: In the Display Options area, check Display Current Value, Display Maximum and Minimum Values, Display Zero Data and Display Continuous Severely Errored Seconds check boxes.
- Click Query to query the data from the NE.
- Optional: Click Reset to reset the performance register of the queried performance event.
NOTE:
After the performance register is reset, the current performance data of this type is cleared. Then, a new performance monitoring period is started.