Creating an OSI GNE

Procedure

1. In the Create NE dialog box, select the NE type from the Object Type tree. Enter the Name and Remarks.
2. Select Gateway from the Gateway Type drop-down list.
3. Select OSI from the Protocol drop-down list.
4. Enter the NSAP Address of the GNE.
   NOTE:

   The NSAP address consists of hexadecimal digits of up to 20 bytes, and its format is: domain address+08003e+NE ID+NSEL. The domain address is composed of 13 bytes and is entered by the user. The NSEL is the port number of the network-layer protocol, with a fixed value of 1d (one byte).

5. Enter the NE User and Password.
   NOTE:

   • The default NE user of the Web LCT must be , and the default password is used.
   • If the NE data on the Web LCT is not applied to the NE, check the NE Pre-configuration check box. Modifying the preconfigured NE does not affect the operation of the network.

6. Click OK.