Setting the Enabling Status of NE Alarm Correlation Suppression

You can enable or disable the NE alarm correlation suppression. This function helps you focus on the root alarms or the services that you concern the most.

Context

You can set the NE alarm correlation suppression to the following two status: Enabled and Disabled.

Enabled: When alarms are raised from an NE, the Web LCT records only the root alarm while suppresses the alarms generated by the root alarm.
Disabled: When alarms are raised from an NE, the Web LCT records all the alarms, including the root alarm and correlative alarms. By default NEs use this mode.

Procedure

Click Query to query the enabling status of the NE alarm correlation suppression from the NE.
Set Correlation Analysis for the NE alarms as follows:
Double-click the Correlation Analysis list and choose Enabled or Disabled from the drop-down list.
- Double-click the Correlation Analysis list and choose Enabled or Disabled from the drop-down list.
- To set Correlation Analysis to Disabled, you can click Default.
Click Apply.