Setting Control Plane Parameters

Procedure

1. In the NE Explorer, select an NE and choose ASON > Control Plane Parameters from the Function Tree.
2. For an ASON whose ASON version is USP V100R010 or later, choose the Electrical Layer or Optical Layer to set the control plane parameters for different domain.
3. Click Query to query the route computation policy from the NE.
4. Click Route Strategy and choose a mode from the drop-down list.
   NOTE:

   • It is recommended that you choose Integrated Constraint Mode.
   • You set the parameter of route strategy as you need in Custom Mode.
   • Only an ASON NE whose ASON version is USP V100R005 or later support custom cost weight.
   • Only an ASON NE whose ASON version is USP V100R010 or later support electrical/optical layer control plane parameters.

   Table 1 Default Value for Optical Layer

   Mode	Bandwidth Load	Bandwidth Weight	Distance Weight	Hop Weight	Custom cost weight
   Load Sharing Mode	0	50	0	0	0
   Shortest Distance Mode	0	0	50	0	0
   Minimum Hop Count Mode	0	0	0	50	0
   Integrated Constraint Mode	0	0	80	20	50
   Custom Mode	0	0	80	20	50

   Table 2 Default Value for Electrical Layer

   Mode	Bandwidth Load	Bandwidth Weight	Distance Weight	Hop Weight	Custom cost weight
   Load Sharing Mode	0	50	0	0	0
   Shortest Distance Mode	0	0	50	0	0
   Minimum Hop Count Mode	0	0	0	50	0
   Integrated Constraint Mode	0	50	50	0	50
   Custom Mode	0	50	50	0	50

5. Click Apply.