Setting the OSPF TE Link Flood Threshold

The TE link flood threshold defines the frequency of the flood on the TE link. After the network fault is cleared, the TE link data changes for times as the NE data upload or synchronization is performed. When the change times reaches the threshold, the flood takes place on the TE link.

Background Information

  • You need to set a proper flood threshold. If the value is too low, network congestions may happen. If the value is too high, the network data may not be synchronous.
  • It is recommended that you use the default value of the Web LCT. By default, the threshold value is 100, and the hold-off time is 3s.

Procedure

  1. In the NE Explorer, select an NE and choose ASON > OSPF Protocol Management from the Function Tree.
  2. Click the OSPF TE Link Flood Threshold tab to set the parameters.
  3. Click Query.
  4. For a TE link, double-click Trigger Condition, Threshold and Delay Time (s) to set their respective values. Click Apply.
Parent topic: Managing the ASON Protocol
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.