Modifying the IP Address of an NE

After modifying the NE ID, you can modify the IP address of an NE based on the engineering planning. Modifying the IP address of an NE does not affect services, but modifying the IP address of a gateway NE affects the communication between the Web LCT and the NEs.

Prerequisites

The user must log in to the NE.

Procedure

  1. Select the NE from the Object Tree in the NE Explorer. Choose Communication > Communication Parameters from the Function Tree.
  2. Set the IP.



  3. Click Apply.
    A dialog box is displayed.
  4. Click OK. A dialog box is displayed, indicating that the operation affects services.
  5. Click OK.

Parameters

Parameter Value Range Default Value Description
IP - This parameter is preset to 129.9.0.x during the factory delivery, where "x" indicates the basic ID.
  • If the NE is planned as the gateway NE, the NE IP address, subnet mask, and default gateway must comply with the requirements for planning the external DCN.
  • If the NE is planned as a non-gateway NE, the IP addresses of other NEs should be set according to the NE IDs. In this case, the IP address should be set to 0x81000000 + NE ID. That is, if the NE ID is 0x090001, the IP address should be set to 129.9.0.1.

Follow-up Procedure

After the IP address of the NE is changed, you need to log in to the NE again.

Parent topic: Modifying NEs
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.