In this user interface, you can query and set advanced attributes of the orderwire, for example, signaling mode, hotline, dedicated call, and orderwire occupied bytes.
Navigation Path
In the NE Explorer, select from the Function Tree. Select Advanced tab.
NOTE: The RTN equipment supports only the setting of orderwire phone occupied byte.
Parameters
Field |
Value |
Description |
|---|---|---|
Analog Signaling |
Selects the optical interface of the local NE connected to the opposite NE, with the orderwire of the opposite NE using analog signaling at the same time. |
|
Digital Signaling |
Selects the optical interface of the local NE connected to the opposite NE, with the orderwire of the opposite NE using digital signaling at the same time. |
|
Hotline |
Phone 1: 100 to 99999999 Phone 2: 100 to 99999999 Phone 3: 100 to 99999999 Clear: Checked, Unchecked |
Defaults not to set any hotline and to cancel the Clear option before number setting. You can set a maximum of three hotline numbers. |
Orderwire Phone Priority |
Phone 1 Phone 2 Phone 3 Break-in Available: Checked, Unchecked |
Sets whether to enable orderwire phone break-in or not. |
Dedicated Call |
Phone 2: 100 to 99999999 Phone 3: 100 to 99999999 Clear: Checked, Unchecked |
Defaults not to set any dedicated call and to cancel the Clear option before number setting. You can set a maximum of two dedicated line numbers. |
Orderwire Occupied Bytes |
E1, E2 |
Selects the overhead bytes in SDH signals to transmit orderwire. |