In this user interface, you can query and set broadcast data ports on an overhead board, establish broadcast data channels and set such parameters as overhead byte and working mode.
In the NE Explorer, select from the Function Tree. Select Broadcast Data Port tab.
Field |
Value |
Description |
|---|---|---|
| Overhead Byte | SERIAL1, SERIAL2, SERIAL3, SERIAL4 Default: SERIAL1 |
The Overhead Byte (Broadcast Data Port) parameter specifies the number of the overhead bytes, which are used to transmit orderwire broadcast data services, in the SDH frame header. |
| Working Mode | RS232, RS422 |
The Working Mode (Broadcast Data Port) parameter specifies the working mode of the interface at which services are added or dropped when you set broadcast data services.Not available to the RTN equipment. |
| Broadcast Data Source | No Data, SERIALx, Bid-BidType-PortID, External Clock Source x | The Broadcast Data Source (Broadcast Data Port) parameter specifies the source of the orderwire broadcast data service. |
| Broadcast Data Sink | Available Broadcast Data Sink: SERIALx, Bid-BidType-PortID, External Clock Source x Selected Broadcast Data Sink: SERIALx, Bid-BidType-PortID, External Clock Source x |
The Broadcast Data Sink (Broadcast Data Port) parameter specifies the sink of the orderwire broadcast data service. |