UNEQ Insertion Switch

You can choose to monitor PDH interface signal loss for a channel as required to trigger UNEQ insertion. During the monitoring, the service of this channel will be interrupted.

Navigation Path

In the NE Explorer, select the board and select Alarm > QoS Alarm > UNEQ Insertion Switch from the Function Tree.

Parameters

Field	Value	Value
Port/Path	For example: 1	Displays the port/path number.
LOS	Disabled, Enabled Default: Disabled	Sets whether to treat the T_ALOS alarm detected by board as a condition that triggers the UNEQ insertion.
PLOS	Disabled, Enabled Default: Disabled	Sets whether to treat the P_LOS alarm detected by board as a condition that triggers the UNEQ insertion.
Path Not Used	Disabled, Enabled Default: Disabled	Sets whether to treat the unused path detected by board as a condition that triggers the UNEQ insertion.