When the equipment accesses IMA services, configure an ATM IMA group at the access node.
Guideline
Figure 1 shows the flow for configuring an IMA group.
Figure 1 IMA group configuration flow
IMA Group Management
In this interface, you can query and set parameters of the IMA group.
Binding
When the RTN equipment accesses IMA services, configure bound channels in an ATM IMA group at the access node. One ATM IMA group corresponds to one ATM trunk port. Bind channels with the ATM trunk port and then enable the IMA group. The ATM trunk port can be bound with one or several E1 or Fractional E1 ports. In this interface, you can configure the bound paths of the ATM IMA.
IMA Group States
In the case of routine maintenance and troubleshooting, the operator need query information on states of an IMA group to check whether the IMA group is normal.
IMA Link States
In the case of routine maintenance and troubleshooting, the operator need query information on states of an IMA link to check whether the IMA link is normal.
