Static Route Management

In this interface, you can set and query parameters related to static route management.

In the NE Explorer, click the NE and choose Configuration > Control Plane Configuration > Static Route Management from the Function Tree.

When the static route is configured, the port IP address and the next hop IP address must be in the same network section.

**Table 1** Descriptions of the parameters for Static Route Management
Parameter	Value	Description
Route List ID	Example: 3	Set the ID of the route list.
Board	Example: Slot-Board Name	Select a board. NOTE: Select the board that supports Layer 3 ports.
Port	Example: Port (Port No.)	Select a port. NOTE: Select the port whose general attributes and Layer 3 attributes are configured.
Next Hop IP Address	Example: 10.70.1.3	Set the IP address of the next hop.
Destination IP	Example: 1.0.1.5	Set the LSR ID of the destination. NOTE: When the last digit of the IP address of the destination is not 0, the subnet mask is 255.255.255.255. For example, if the IP address is 193.168.3.2, the mask of the destination node is 255.255.255.255. When the last digit of the IP address of the destination is 0, the subnet mask is 255.255.255.0 or 255.255.255.255. For example, if the IP address is 193.168.3.0, the mask of the destination node is 255.255.255.255 or 255.255.255.0.
Destination IP Subnet Mask	Example: 255.255.255.0	Set the mask of the destination IP address.