E-AGGR Service

In this interface, you can create and query an E-AGGR service.

Navigation Path

In the NE Explorer, click the NE and choose Configuration > Ethernet Service Management > E-AGGR Service.

Buttons

Button

Description

Configuration

Display the interface where you can configure the port.

Configure QoS

Display the interface where you can configure the QoS. For details on the parameters in the interface, see QoS.

View Policy Details

Check information on the QoS policy used by the PW.

OAM

Perform OAM to activate or deactivate the CC, start the LB and LT.

In the case of OptiX RTN 910/950, this button is not supported.

Delete
Select the service that you want to delete. Click Delete, and the Prompt dialog box is displayed. Confirm the deletion, and the Operation Result dialog box is displayed, indicating that the operation is successful.
NOTICE:

This operation causes service interruption. Exercise caution when you perform this operation.

After the service is deleted, the corresponding PW is automatically deleted.

Parameters

Table 1 Descriptions of the parameters for E-AGGR Service

Field

Value

Description

Service ID

Example: 11

Set and query the ID of the Ethernet service.

Service Name

Example: test

Set and query the name of the Ethernet service.

Service Tag Role

User, Service, -
Set and query the service tag role.
  • User: The outer C/SVlan tag of user packets is used as the user VLAN tag. When the packets are forwarded, the packet forwarding is based on the user VLAN tag.
  • Service: The outer C/SVlan tag of user packets is used as the service VLAN tag. When the packets are forwarded, the packet forwarding is not based on the service VLAN tag.
MTU (bytes)

46 to 9600, -

Indicate the maximum transport unit (MTU). When receiving packets of a length more than the MTU, the port divides the packets into segments and then transport these segments. If the packets contain a flag indicating that packet division is not allowed, the port discards the packet.

Deployment Status

Deployed, Undeployed

Display the deployment status of the service.

Tabs

Tab

Description

UNI

Set and query related parameters of the user-side interface. For details, see UNI.

NNI

Set and query related parameters of the network-side interface. For details, see NNI.

QoS

Query the QoS attributes and the policy information. For details, see QoS.

Port Attributes

Query the port attributes. For details, see Port Attributes.

VLAN Forwarding Table Item

Set and query items in the VLAN forwarding table. For details, see VLAN Forwarding Table.

Maintenance Association

Create and query the MA. For details, see Maintenance Association.

MEP Point

Create the MEP point only when the MA is available. For details, see MEP Point.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.