You must set the local loopback ID (LLID) for an NE before performing the loopback (LB) test on it. If the default LLID is unique in the network, you can keep the LLID as default.
In the NE Explorer, click the NE and select from the Function Tree. Click the LLID tab.
Field |
Value |
Description |
|---|---|---|
Country Code (Hexadecimal) |
Default:[2BYTE]00 00 |
The LLID parameter specifies the loopback location. It contains 15 bytes. |
Network Code (Hexadecimal) |
Default:[2BYTE]00 00 |
|
NE Code (Hexadecimal) |
11BYTE Default: NE ID (four bytes) + zeros (7 bytes) |