ATM OAM Management

Segment End Attributes
In this user interface, you can set and query segment and end points for monitoring alarms.
CC Activation Status
In this user interface, you can set and query the activation status of connectivity check (CC).
Remote Loopback Test
In this user interface, you can perform remote loopback test.
LLID
You must set the local loopback ID (LLID) for an NE before performing the loopback (LB) test on it. If the default LLID is unique in the network, you can keep the LLID as default.
Insert OAM Cell to ATM
In the ATM alarm transmission function, ATM OAM cells are inserted when the equipment detects an ATM service fault, so that the fault information can be transmitted to a remote end.