Setting Performance Monitoring Time of NE

By setting performance monitoring parameters of an NE properly and starting the performance monitoring for the NE, you can obtain the detailed performance record during the running of the NE. This facilitates the monitoring and analysis of the NE running status performed by maintenance personnel.

Context

Batch configuration of performance monitoring time is implemented mainly in new deployment and expansion scenarios. If you need to adjust a single NE, set the performance monitoring time just for the NE.

Procedure

Configure the performance monitoring time for a single NE.
1. In the NE Explorer, select an NE and choose Performance > NE Performance Monitor Time from the Function Tree.
2. Click Query to query the data from the NE.
3. Set the parameters of the 15-minute and 24-hour performance monitor time according to the requirement. Click Apply.
  NOTE:
  - The start time must be later than the current time of the network management system and the end time must be later than the start time.
  - If the end time is not set, this indicates that the performance monitoring starts from the start time and does not stop.
4. Click Apply and then click Close in the Operation Result dialog box.