This section describes the procedure for configuring the DCC bytes transparent transmission solution. Configure OptiX radio transmission equipment to use D4-D12 bytes as DCCs and transparently transmit D1-D3 bytes used by third-party equipment.
Context
NOTE: In this configuration example, only the configuration information about NE1 is provided.
Procedure
- Change the NE ID.
Take NE1 as an example.
- Set NE Communication Parameters.
Take NE1 as an example.
- Configure DCCs.
- Configuring DCC Transparent Transmission.
- Query ECC Routes.
Take NE1 as an example.
The expected result is as follows: The ECC routes to NE2, NE3, and NE4 can be queried on NE1.
- Create NEs by using the Search Method (U2000).
The search domains include the following: The search domain when the IP address of the GNE is 10.0.0.1.
In normal cases, all the NEs can be created on the centralized NMS.