Specifying Bit Error Alarm Threshold

This topic describes how to specify an alarm threshold for the board bit error as required. When the value of bit error exceeds the threshold, alarms are generated.

Procedure

  1. In the NE Explorer, select a board and choose Alarm > QoS Alarm > Bit Error Alarm Threshold from the Function Tree.
  2. Set the desired threshold. If error bits exceed the Signal Degrade threshold, the signal has degraded. If error bits exceed the Excessive BER threshold, the error bits are excessive.

    NOTE:

    There are two types of bit error thresholds for the excessive bit error and signal degrade.

  3. Click Apply. In the dialog box that is displayed, click Yes.
Parent topic: Specifying the Port QoS Alarm
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.