Setting the Register Mode for NE Alarms

This topic describes how to set register modes for NE alarms. The NE alarm register stores alarms based on the specified register modes.

Context

You can set the register mode for NE alarms to Wrap or Stop.
  • Wrap: When the NE alarm register is full, the register discards the earliest alarms to store new alarms. The Wrap mode is the default mode and used more often than the Stop mode.
    NOTE:

    The NE alarm register can store all alarms and report them in time to the U2000 Web LCT when the NE is working properly.

  • Stop: When the NE alarm register is full, it does not accept any new alarms so that you cannot be informed of the new alarms. Therefore, usually this mode is not used.

Procedure

  1. Click Query to query the alarm register mode of the NE from the NE.
  2. Set Register Mode for the NE alarms as follows:
    • Double-click the Register Mode list and choose Wrap or Stop from the drop-down list.
    • To set Register Mode to Wrap, click Default.
  3. Click Apply.
Parent topic: Setting NE Alarm Attributes
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.