Starting a Fast Fault Location Test

When a line is faulty, you can perform a fast fault location test to locate the fault point.

The line test baseline in the out-of-service mode must be set.

In the NE Explorer, select an NE and choose Configuration > Submarine Line Monitoring from the Function Tree.
Select a line, click Out-of-Service Mode, and select Start Fast Fault Location Test.
NOTE:
- After the test begins, the Current Working Status of the selected line is shown as Test Status. The window shows the remaining time and progress of the test.
- After the test ends, the Current Working Status of the selected line is shown as Idle Status.
Optional: Click View Test Result to view the line test result.
NOTE:
For details, see Querying the Line Test Result.