You can perform a loopback (LB) check on Ethernet services without interrupting services to check the connectivity of the services for locating and handling faults.
In the NE Explorer, select a board and choose . Select a record, right-click, and choose from the shortcut menu.
Button |
Description |
|---|---|
Start LB |
Performs LB test. |
Field |
Value |
Description |
|---|---|---|
Source MP ID |
00-00-0001 to FF-FF-FF00 |
Displays the source MP of the LB test. |
Sink MP ID |
00-00-0001 to FF-FF-FF00 |
Displays the sink MP of the LB test. |
| Test Result | Succeeded, Failed | The Test Result (LB and LT Test) parameter specifies the result derived from the LB or LT test each time. |
Test based on the MAC Address |
Checked, Unchecked |
Sets to test based on the MAC address or not. |
Sink MP MAC Address |
For example: 00-01-00-0F-00-00 |
Displays the Sink MP MAC Address. |