WDM Interface

In this window, you can configure the WDM interface.

On the right side of the WDM interface, there are four domains from the top down:

The first field provides two option buttons (By Board/Port (Channel) and By Function) that are used to select the attribute classification mode.
The second field specifies the object that needs to be set after the classification, which varies with the first field.
The third field specifies attributes, which vary with the second field. Double-click or select to set attributes (for attribute description, refer to the parameter descriptions of different boards).
The last field provides two buttons at the bottom: Query and Apply. Before setting, you can click Query to query the board attribute from the NE and after setting you need to click Apply to send the configurations.

In the NE Explorer, select a board and choose Configuration > WDM Interface from the Function Tree.

Optical Transponder Board
In this user interface, you can set parameters for optical transponder boards. The parameters are laser status, automatic laser shutdown, maximum or minimum attenuation rate and path use status.
Tributary and Line Boards
In this user interface, you can set parameters for tributary and line board boards, such as laser status, automatic laser shutdown and path use status.
Protection Board
In this user interface, you can set parameters for protection boards. The parameters are laser status, automatic laser shutdown, maximum or minimum attenuation rate and path use status.
WDM Interfaces for the Submarine Equipment
In this user interface, you can configure the detailed parameters for the WDM interface of the OptiX SLM1630.