Subwavelength SNCP Service

In this user interface, you can query and modify the attributes and status of an SNCP service.

Navigation Path

In the NE Explorer, select the NE and choose Configuration > Subwavelength SNCP Service from the Function Tree.

Buttons

Button	Description
Function	Provides functions for SNCP services control. Click this button and the drop-down list provides the options as follows: Query Switching Status, Clear, Force to Protection, Force to Working, Manual to Protection, Manual to Working, Lockout
Query	Queries the attributes and status of all SNCP services.
Apply	Applies the configuration to the NE.

Button

Description

Function

Provides functions for SNCP services control.

Click this button and the drop-down list provides the options as follows: Query Switching Status, Clear, Force to Protection, Force to Working, Manual to Protection, Manual to Working, Lockout

Query

Queries the attributes and status of all SNCP services.

Apply

Applies the configuration to the NE.

Shortcut Menu Items

Item	Description
Query Switching Status	Queries the switching status of a protection group.
Clear	Clears switching for the selected port.
Force to Protection	Forces a service to switch from the working channel to the protection channel regardless of the protection channel status.
Force to Working	Forces a service to switch from the protection channel to the working channel regardless of the working channel status.
Manual to Protection	Performs manual switching from the working channel to the protection channel. If the protection channel is normal, the switching takes place. If the protection channel fails or must satisfy a switching request of higher priority, the switching does not take place.
Manual to Working	Performs manual switching from the protection channel to the working channel. If the working channel is normal, the switching takes place. If the working channel fails or must satisfy a switching request of higher priority, the switching does not take place.
Lockout	Regardless of the status of the working channel, the services are locked in the working channel.

Parameters

Field	Value	Description
Source Channel	Equipment that supports the master and slave shelf management: shelf ID(shelf name)-slot number-board name-port number(port name)-channel number Equipment that does not support the master and slave shelf management: slot number-board name-port number(port name)-channel number NOTE: For details about the differences between the standard and compatibility modes, see the Impacts of the Standard Mode on the U2000 Web LCT in Channel Model (OTU, Line or PID Board).	Displays the source optical channel of the service.
Sink Channel	Equipment that supports the master and slave shelf management: shelf ID(shelf name)-slot number-board name-port number(port name)-channel number Equipment that does not support the master and slave shelf management: slot number-board name-port number(port name)-channel number NOTE: For details about the differences between the standard and compatibility modes, see the Impacts of the Standard Mode on the U2000 Web LCT in Channel Model (OTU, Line or PID Board).	Displays the sink optical channel of the service.
Level	For example: GE	Displays the service type of the SNCP.
Protection Type	SW SNCP, SNC/I, SNC/N, SNC/S, MS SNCP	Displays the protection type of a service. NOTE: When you select Protection Type is ODUK SNCP, you can set this parameter.
OTN Level	For example: PM	Sets the OTN level. NOTE: When you select SNC/N or SNC/S in Protection Type, you can set this parameter.
Status	Normal State, WTR State, Manual (from Protection to Working) Switching State, Manual (from Working to Protection) Switching State, Forced (from Protection to Working) Switching State, Forced (from Working to Protection) Switching State, SD Switching, SF Switching, Lockout	Displays the switching status of the current protection group.
Revertive Mode	Revertive, Non-Revertive Default: Non-Revertive	Displays the revertive mode that indicates whether services are switched back from the protection channel after the working channel is normal.
WTR Time (mm:ss)	5:00 to 12:00	Sets the wait-to-restore time. The amount of time that elapses from the moment when the working channel is normal to the moment when services are switched back to the working channel. You can modify the WTR Time (s) only when the Revertive Mode is Revertive.
Hold-Off Time (100ms)	0 to 100 Default: 0	Sets the time interval between the time when the system detects signal degrade and the time when the service switching occurs, in order to avoid repeated switching when the service status is not stable.
SD Switching	Enabled, Disabled Default: Disabled	Sets the SD enabling status.
SD Trigger Condition	-	Display the SD trigger condition.
Channel Status	Normal, SF, SD, Unknown	Displays the status of the working service or the protection service in a protection group.
Current Channel	Working Channel, Protection Channel, Delay Start, Unknown	Displays whether the working service or the protection service is selectively received.