USB Access Control

In this user interface, you can enable or disable universal serial bus (USB) access. After enabling USB access, you can back up data through USB interfaces.

Guideline

After USB access is enabled, you also need to generate an authentication file over a special USB authentication file generation tool and copy the file to a USB flash drive. Then the USB flash drive can access NEs after being inserted into a USB interface.

Navigation Path

In the NE Explorer, choose Communication > Access Control from the Function Tree. Click the USB Access Control tab.

Parameters

Field	Value	Description
Board	slot number-board name	Indicates the board configured with USB access.
Enabled Status	Enabled, Disabled	Specifies whether to enable USB access.