Core Routing Table

In this user interface, you can query the routing information about adjacent NEs by DCN link. The information is displayed in a core routing table. During deployment, you can use this function to quickly confirm whether the communication between the new created NE and the gateway NE is normal.

Navigation Path

In the NE Explorer, select the NE and choose Communication > Core Routing Table from the Function Tree.
In the NE Explorer, select the NE and choose Communication > DCN Management > Core Routing Table from the Function Tree.

Parameter Description

Parameter	Settings	Description
Destination NE	NE name, NE(Extended ID-ID)	Indicates the destination NE of a route in the routing table. NOTE: If the NE exists on the NE list, NE name is displayed. If the NE does not exist on the NE list, NE(Extended ID-ID) is displayed.
Protocol Type	ECC Unused, TCP/IP, OSI, HWECC, OTHER	Indicates the protocol type that is used in a query performed according to a DCN link.
Next Hop Address	NE name, IP Addresses	Indicates the name or IP address of the neighboring downstream NE of the current NE in a route that directs to the destination NE. NOTE: If Protocol Type is TCP/IP, NE IP addresses is displayed. If Protocol Type is set to other protocol types except TCP/IP, NE name is displayed.
Routing Distance (hop)	Example: 5	Indicates the number of hops required for a route to reach the destination NE.
Route Attribute	Manual, Automatic, Direct	Indicates the way in which core routes are generated when the next-hop IP address is searched out. Automatic: Routes are automatically generated based on the HWECC/IP routing protocol. Manual: Routes are manually configured. Direct: Direct routes are automatically generated on an L2DCN.