DCC Rate Configuration

In this user interface, you can set DCC rate and whether to enable DCC communication, according to network management requirements.

In the NE Explorer, click the NE and select Communication > DCC Management from the Function Tree. Select the DCC Rate Configuration tab.

In the NE Explorer, click the NE and select Communication > DCC Management from the Function Tree. Select the DCC Management tab.

Field	Value	Description
Port	Equipment that supports the master and slave shelf management: shelf ID(shelf name)-slot number-board name-port number(port name) Equipment that does not support the master and slave shelf management: slot number-board name-port number(port name)	The port of DCC communication.
Enabled/Disabled	Enabled, Disabled Default: Enabled	Sets whether DCC communication is enabled or not.
Channel	For example: GCC0	Sets the DCC channel-occupied bytes, that is, the channel rate.
DCC Resources	Obtained Already, Obtaining Failed. Default: Obtained Already.	DCC resource acquisition of the specified optical port at the NE side.
Communication Status	Normal, Receiving failed, Transmitting failed, Receiving/transmitting failed	The communication state of the specified optical port.
Bandwidth Negotiation Switch	Enabled, Disabled	Set the state of the bandwidth negotiation Switch of the selected port.
Protocol Type	TCP/IP, OSI, Auto, HWECC, L2DCN, HWMAC	The protocol type of DCC communication. NOTE: Different type of NEs support different protocol type.
LAPD Role	Network, User	The role of DCC communication.
LAPD MTU	1512	The maximal package of the LAPD.
Bind/Bound Flag	Enabled, Disabled	Sets and displays the bound status of the port link.
Domain/DCN Flag	Control domain, Management domain	Sets and displays the DCN domain.