Clock ID Output

When you create a clock subnet or handle a clock fault, you can distinguish different clock sources by clock ID. In this user interface, you can query and set the enabling status of clock IDs.

Navigation Path

In the NE Explorer, choose Configuration > Clock > Physical Clock > Physical Clock Subnet Configuration. Click the Clock ID Output tab.

Parameter Description

**Table 1** Parameters for Clock ID Output
Parameter	Value	Description
Line Port	Equipment that supports the master and slave shelf management: shelf ID(shelf name)-slot number-board name-port number(port name) Equipment that does not support the master and slave shelf management: slot number-board name-port number(port name)	Indicates the name of the line port.
Other Fiber End	For example: NE2-Shelf18(subrack)-18-11ST2-2(RM2/TM2)	Indicates the port connected to the clock source by a fiber.
Output Clock ID	Enabled, Disabled Default: Enabled	Specifies whether to set the output service through the port carries any clock ID signal.