IP over DCC Solution

The IP over DCC communication transmits DCC data by the using IP data packets. The IP over DCC directly operates and maintains remote NEs by using standard TCP/IP protocol. In addition, it realizes the application functions, such as FTP, Telnet, and SNMP. As essential parts of the IP over DCC communication, the dynamic and static routing protocols are used to create route information.

Modifying an NE ID
In the commissioning or expansion process, when you need to adjust the original planning and change the NE ID, you can use the U2000 Web LCT to achieve it.
Setting NE Communication Parameters
When configuring communication, set the parameters including IP, subnet mask, gateway IP, extended ID, and connection mode for the NE.
Configuring the IP Static Route for an NE
A static route forwards the data between NEs, or between a router and the computer where the U2000 Web LCT is installed.
Querying the OSPF Protocol Status
You can query the Open Shortest Path First (OSPF) protocol status.
Configuring Proxy ARP
The address resolution protocol (ARP) helps you to query the MAC address of the destination equipment using its IP address. If you enable proxy ARP for a GNE, the GNE can answer ARP requests for other non-gateway NEs, so that you can set IP addresses of NEs of the same network in the same network segment.

Parent topic: DCN Management

Related concepts

Basic Concepts of IP over DCC

Features and Functions of IP over DCC

Application of IP over DCC