Changing an NE ID

The ECC protocol uses the NE ID as the unique identifier of an NE. Hence, you need to assign a unique NE ID to each NE when planning a network. If an NE ID conflicts with another NE ID, it causes an ECC route conflict and the U2000 Web LCT cannot manage certain NEs. During the commissioning or expansion process, when you need to adjust the original network planning and change NE IDs, you can use the U2000 Web LCT to change NE IDs.

Prerequisites

The NE must be created.

Precautions

NOTICE:

Changing the NE ID may interrupt NE communication and reset the NE.

Procedure

In the NE Explorer, select an NE and choose Configuration > NE Attribute from the Function Tree.
Click Modify NE ID, and the Modify NE ID dialog box is displayed.
Enter the New ID and the New Extended ID. Click OK.
In the Confirm dialog box that is displayed for two times, click OK and then click Close in the Operation Result dialog box.